Detail PanBlastTM AER85 Closed Circuit Blaster
PanBlast™ AER85 Closed Circuit Blaster
The PanBlast™ AER85 Closed Circuit Blaster is the smallest of the closed circuit
blast machines and is a completely air operated system; no electrical power is required.
The blasting and recovery operation are confined to the blast head assembly, so that
dust free blasting may be carried out within proximity to other workshop operations.
A suction feed type blasting system is used on the PanBlast™ AER85 unit. This
system uses an air ejector in the blast gun to create a vacuum, which draws the abrasive
from the storage hopper via the blast hose to the blast gun where it enters the air blast
stream.
A second air ejector is used to create the vacuum required to recover the spent
abrasive and dust from the blasting process, which is drawn back to the unit via the
recovery hose from the blast head assembly.
Good, re-usable abrasive is dropped back into the abrasive hopper, while the
dust is filtered from the air stream by a replaceable filter cartridge. Only clean, filtered
air is discharged from the unit.
PanBlast™ AER85 Technical Data
Compressed Air Requirement: 85m³ / hr ( 50cfm)
Vacuum Recovery System: Air Ejector Type
Blast Gun Size: Air Tip: 3mm ( 1/ 8" ) . Nozzle 6mm ( 1/ 4" )
Hose Length: 4m ( 13ft )
Abrasive Capacity: 28 Litres ( 1ft³ )
Blasting Cycle: Continuous
Tampilkan Lebih Banyak